D-Link Nuclias Connect DAP-2610

D-Link DAP-2610 User Manual
9
To set up and manage the DAP-2610, use one of the following methods:
1. Connect the access point and your computer to the same PoE switch. Manage the access point from the computer.
Enter dap2610.local in the address eld of your browser.
Log in to the Administration user interface. The default login information is:
Username: admin
Password: admin
2. Connect the access point and your computer via DPE-301GI PoE injector. Manage the access point from the computer.
Enter dap2610.local in the address eld of your browser.
Log in to the Administration user interface. The default login information is:
Username: admin
Password: admin
3. Connect the access point and your computer to the same network switch. Manage the access point from the computer.
Enter dap2610.local in the address eld on your browser.
Log in to the Administration user interface. The default login information is:
Username: admin
Password: admin