D-Link xStack DES-3200-10 User Manual

xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Time Zone Settings
The following window is used to configure time zones and Daylight Savings Time settings for SNTP.
To configure the time zone settings for the Switch, click Configuration > SNTP Settings > Time Zone Settings:
Figure 2 - 27. Time Zone Settings window
The following parameters can be set:
Parameter Description
Time Zone and DST
Daylight Saving
Time State
Use this pull-down menu to enable or disable the DST Settings.
Daylight Saving
Time Offset in
Minutes
Use this pull-down menu to specify the amount of time that will constitute your local DST offset
30, 60, 90, or 120 minutes.
Time Zone Offset
from GMT in +/-
HH:MM
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean
Time (GMT.)
DST Repeating Settings
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning
and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second
week of April and end DST on Sunday during the last week of October.
From: Which Week
of the Month
Enter the week of the month that DST will start on.
33

D-Link xStack DES-3200-10 Specifications

General

Brand	D-Link
Model	xStack DES-3200-10
Category	Network Router
Language	English