xStack
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Limited Multicast Range Settings
This window enables the user to configure the ports on the Switch that will be involved in the Limited IP Multicast
Range. The user can configure the range of ports and associate an IP Multicast Profile to allow or disallow IGMP join
requests to multicast groups defined in the profile.
To configure these settings, click L2 Features > IGMP Snooping > Limited Multicast Range Settings:
Figure 3 - 34. Limited Multicast Range Settings window
To add a new range enter the information and click Add, to delete an entry enter the information and click Delete.
Max Multicast Group Settings
This window allows users to configure the ports on the Switch that will be a part of the maximum number of multicast
groups that can be learned. To add a new Max Multicast Group, enter the information and click Apply.
To view this window, click L2 Features > IGMP Snooping > Max Multicast Group Settings:
84
To Next Page
Loading...
Need help?
General
