DAB esybox mini3 User Manual

ENGLISH
58
8. APP, DCONNECT CLOUD AND SOFTWARE UPDATE
The “Smart Solution” APP DConnect is, together with the pump display, the interface for local control of the Esybox Mini pump. Via the
DConnect APP you can update the product and configure the main parameters of the device with the convenience of an easy-to-use and always
handy APP. The DConnect APP allows you to make the necessary updates (see dedicated section) directly from your smartphone without
cumbersome external objects.
Via the APP it is possible to interact locally with the product through the “Direct Connection” menu accessible
directly from the main page of the APP
.
Menu - Direct connection
The DConnect CLOUD “Smart Solution” allows you to control your systems remotely both through the
appropriate internet portal: dconnect.dabpumps.com and through the DConnect APP itself via the appropriate
menu “Your installations”, accessible directly from the APP main page
.
Menu - Your Installations
NOTE 1: The DConnect Cloud remote control service requires registration with the portal and, after a trial period, it requires a subscription. All
information is available on the site: www.internetofpumps.com
NOTE 2: This manual refers to DConnect APP menus, colours or descriptions may change.
To get the best out of the product and its interaction with the APP and the DConnect Cloud service, consult also the online documentation and
watch the demonstration videos. All the necessary information is available on the site: www.internetofpumps.com or www.dabpumps.com
8.1 - System requirements
- APP requirements: Smartphone
- Android ≥ 8 (API level 23).
- IOS ≥ 12
- Internet access, WiFi and Bluetooth enabled.
- Grant the authorisations proposed from time to time by the
smartphone operating system
-
Requirements for access from WebAPP: PC
- WEB browser that supports JavaScript (e.g. Microsoft Edge,
Firefox, Google Chrome, Safari).
- Internet access.
- Product Network Requirements
- Active and permanent direct Internet connection at the installation site
.
- Modem/Router WiFi (2,4 Ghz).
-
Good quality WiFi signal and power in the area where the product is
installed.
NOTE: If the WiFi signal is deteriorated, we suggest using a Wifi Extender
.
An Internet network test is recommended before configuring the product
.
The use of DHCP is recommended, although a Static IP can be set.
8.2 - Updating the software
Updates ensure a better use of the services offered by the product.
Before starting to use the product, make sure that it is updated to the latest software version available. During the software update the products
involved cannot carry out pumping functions. For this reason a manned update is recommended.
NOTE 1: The update can take up to 5 minutes per product and when it ends the pump will restart.
The software update can be carried out:
- locally: directly from the DConnect APP (recommended)
- remotely if you subscribe to the Cloud DConnect service.
8.3 - Local updates via APP DCONNECT
Be sure to download the latest version of the DConnect DAB APP available from the App Store and Google Play and approve all
authorisation requests, policies and terms and conditions that appear on your smartphone screen.

DAB esybox mini3 Specifications

General

Brand	DAB
Model	esybox mini3
Category	Water Pump
Language	English