When reassembling each part, replenish it with speci-
•
CAUTION
Point No. Amount
Reaping Gear Case
1 120g
2 100g
Reaping Shaft Case
3 150g
Cutter Unit Drive Case
4 100g
5 100g
6 70g
Cutter Drive Case (RH)
7 50g
Elevator Driver Case 1
8 100g
Elevator Shift Case
9 150g
10 50g
Elevator Shift Case 4.5
11 50g (Each)
12 50g
Elevator Shift Case 8.9
13 50g (Each)
Feeding Case (Right)
14 70g
Depth Case
15 50g
Left Rake Case
16 70g
Depth Drive Case (Motor)
Depth driver (installed at
the engine)
No diagram to show 50g or on teeth
No. 1 bevel gear case: 60g
(Vertical auger drive case)
Straw bevel gear case: 120g
(Straw discharging chain drive
case)
THRESHING UNIT
To Next Page
Loading...
