Daedong DSC62 User Manual

For convenient operation and service, the following symbols are used for the controllers. Please become fa-
miliar with them to learn how to operate and service your machine correctly.
Horn “Low” engine speed “High” engine speed
Indicating the direction of
turn signal lights
Head lamp
Vent lamp and the work
lamp
The direction combine and
lowering/raising the reaping
unit
Engine stop
Flickering to indicate opera-
tion of turn signal lights
Fuel level Coolant temperature Engine oil pressure
Charging Battery
SYMBOLS OF THE CONTROLLERS
DSC62-영문판-0장.indd 1 2012-04-16 오후 6:34:08

Daedong DSC62 Specifications

General

Engine Power	62 hp
Drive Type	4WD
Rated RPM	2600 rpm
Hydraulic System	Open Center
Engine Type	Diesel
Transmission Type	Synchro Shuttle
PTO Speed	540 rpm

Summary

Safety Cautions

Checking Before Operation

Pre-operation checks and safety precautions for safe use.

Harvesting Instruction

Guidance on operating the combine during various harvesting conditions.

Specifications

How to Use Meters, Gauges and Controllers

Pre-Starting Checks

Daily Check

Detailed list of daily inspection points and troubleshooting.

How to Move, Drive and Transport the Combine

Starting and Stopping the Engine

Steps for safely starting and stopping the engine.

Driving on Roads

Safety precautions and procedures for driving on roads.

Harvesting Instruction

Working Conditions of Crop and Paddy Field

Factors affecting combine performance related to crop and field conditions.

Preparation Before Reaping

Steps to prepare the combine and field before reaping.

Combine Harvesting

Procedures for operating the combine during harvesting.

Maintenance

Maintenance Schedule Table

Schedule for routine inspection, service, and replacement of parts.

Battery

Safety precautions and maintenance for the battery.

Routine Inspections and Adjustments

Regular checks and adjustments for optimal performance.

Checking the Engine Oil

Procedure for checking and changing engine oil.

Checking the Coolant in the Radiator

Procedure for checking coolant levels.

Changing the Transmission Oil

Changing the Fuel Filter

Changing the Engine Oil Filter Cartridge

Changing the Straw Cutter Blade

Adjusting the Clearance Between the Upper and Lower Blades

Adjusting the Reaping Blade

Changing the Straw Cutting Blades

Long Term Storage

Troubleshooting

The Buzzer Sounds Beep-Beep Intermittently

The Buzzer Beeps and the Engine Stops

The Engine Does Not Start

Troubleshooting guide for an engine that fails to start.

The Feeding Conveyor Fails to Convey Crops or Crops are Unevenly Conveyed

Grain Loss is Considerably Large

Seperation Performance is Poor