Daedong DSC62 User Manual

4-14 DSC62
Working state Adjustment method
When there is rela
-
tively large load on
the threshing bar
-
rel for harvesting
lodged crops
Open
Routine work
Standard
When the crops are
scattered and there
are many crushed
grains
Close
Adjust the position of lever accord-
ing to working condition.
DRIVER’S SEAT
417O419B
C
D
(A) HIGH (B) LOW
(C) Backward (D) Forward
1. When adjusting the up/down
position of the seat, remove the
securing pin rst. Adjust the seat
to directions A and B at appro-
priate position and then fix the
securing pin.
2. When adjusting the front/back
position of the seat, loosen the
xing bolt rst. Adjust the seat to
directions C and D at appropri-
ate position and then tighten the
xing bolt.
USAGE OF THE AUTO-
MATIC CONTROLLERS
(1) Automatic Feeding Depth Controller
417O420A
Ref to the page 4-19.
DSC62-영문판-4장.indd 14 2012-04-17 오후 4:55:07

Daedong DSC62 Specifications

General

Brand	Daedong
Model	DSC62
Category	Farm Equipment
Language	English