When getting off the combine,
take the key with you leaving
the combine.
When loading on to or unload-
ing the combine from a vehi-
cle, use ramps that are strong,
wide and long (4 times long as
the height of the cargo bed of
the vehicle) enough and have
anti-slippery hooks.
Ensure the ramps are straight
-
ly lined up with the cargo bed
of the transporting vehicle and
the hooks on the ramps are
securely engaged.
•
•
•
417O112A
Check immediate vicinity of
the combine for bystanders.
Drive the combine forward at
a low speed to be loaded it
up to the transporting vehicle.
Backup slowly to unload the
combine from the vehicle.
•
•
417O113A
Never try to shift or turn on the
ramps.
•
To Next Page
Loading...
Need help?
General
