417O817A 417O818A
5. Install the left cover.
(1) Left Side Cover (2) Upper Cover (1) Auxiliary Cover (2) Wing Bolts
6. Pull out auxiliary cover of the
hook,andxtheauxiliarycover
with the wing bolts.
* Remove the cutter in the re-
verse order of the installation.
To avoid mixing of different grains
such as rice and wheat, remove
the remaining grains from the
inside of the combine after each
harvest season.
CLEANING UP THE INSIDE
1. Shut off the engine and dis-
engage the threshing clutch
before any manual adjust-
ment, inspection, removal
or installation of parts, and
cleanup.
2. When idling on the com
-
the threshing rotor to the
combine and close the grain
tank and cutter covers.
3. When closing a cleaning port,
operate its cleaning lever a
couple of times to ensure that
no grain is left on the port.
Then, close the port.
CAUTION
To Next Page
Loading...
