Daedong DSC62 User Manual

10-2 DSC62
THE BUZZER SOUNDS BEEP-BEEP INTERMITTENTLY
Immediate actions Cause Checking point Troubleshooting Reference
Check the alert
lamps
The load
gauge lamp
is ickering
Slow
down the
combine
Too much
loads

Feeding depth
control lever (auto-
matic)

Manual feeding
depth control
lever (manual)

Check if the feeding depth is
lever is engaged in a proper
position
Straw cutting blades

Check if the cutting blades are
worn out. Change or sharpen
the blades
Threshing compart-
ment

Set the straw debris treatment
lever on STANDARD or OPEN
Grain lamp is
ickering
Stop reaping
and disengage
the reaping
clutch lever
and threshing
clutch lever
The hopper
is full
Hopper, grain sacks

Discharge grains into sacks

Change the sacks
No.1 lamp is
ickering
No.1 auger is
clogged
No.1 auger

Remove grains and straw debris
in the No.1 auger
No.2 lamp is
ickering
No.2 thrower
is clogged
(Discharge)
No.2 discharging
thrower

Remove grains and straw
debris in the No.2 thrower
Check the
coolant ther-
mometer
The ther-
mometer
needles on H
The coolant
temperature
is too high
Coolant

Check any leakage and the
amount of coolant
Fan belt

Check if the belt is loose
Dust screens
Radiator
Oil cooler

Remove dirt and straw debris
Check the au-
tomatic feeding
depth lamp
The auto-
matic feeding
depth lamp is
ickering
Straws or
weeds are
caught on its
sensor
Feeding depth sen-
sor

Remove the weeds and straw
debris
DSC62-영문판-10장.indd 2 2012-04-16 오후 6:26:09

Daedong DSC62 Specifications

General

Brand	Daedong
Model	DSC62
Category	Farm Equipment
Language	English