ReferenceTroubleshooting
Remove the foreign objects and check
the cutter blades
Remove the foreign objects and check
the conveyor parts
Adjust the reaping clutch lever rod
Replace the reaping drive belt with a
new one
Adjust the front ends of the dividers to
the same height
In a lodged paddy eld, adjust working
speed for the divider not to touch the
roots
Checking point
Cutter blades
Conveying part
Reaping drive
belt
Reaping clutch
lever
Divider
Working speed
BULLDOZING CROPS WITHOUT REAPING
Immediate actions
Stop reaping and disengage the
reaping clutch lever
Stop the engine
Cause
Foreign objects such as dirt,
roots of crops, or even stones
are clogged
The reaping drive belt is slip-
ping
Conveying part are clogged
with roots
CAUTION
When crops were conveyed
with root, cut the root of
the crop with a sickle and
teed them to the thresher
by hand.
•
To Next Page
Loading...
Need help?
General
