(1) Plant Side Chain (RH)
(
)
(1) Depth Chain
(
)
(1) Elevating Chain
(
)
417O829A
(1) Plant Side Chain (LH)(
)
417O830A
417O832A417O831A
○
Replenishing Oil
1. Raise the reaping unit 5~15cm
away from the ground on flat
road surface and then secure
braking.
2. After it is started, adjust the ro-
tating speed to the middle scope
(1600~1800rpm); and then con-
nect threshing clutch, rotating
reaping unit and threshing unit.
Make sure to add oil to the cut-
ter when the engine is under
non-working state.
3. Add oil to the locations where
c h a i n s c an n o t b e d ir ec tl y
touched.
To Next Page
Loading...
