Daedong DSC62 - Page 180

12-2 DSC62
A
ABOUT SERVICE ......................................................... 2-2
ACCELERATOR LEVER ............................................... 4-9
ACCESSORIES/LIST OF CONSUMABLES ............... 11-1
ACCESSORIES ......................................................... 11-2
ACCESS TO THE STRAW CUTTER .......................... 8-16
ADJUSTING OR REPLACING
THE REAPING BLADE ........................................... 8-59
ADJUSTING THE BELTS ............................................ 8-40
ADJUSTING THE CONVEYOR BELT ......................... 8-43
ADJUSTING THE CRAWLER TENSION .................... 8-40
ADJUSTING THE ELEVATOR CHAIN ........................ 8-43
ADJUSTING THE FEEDING DEPTH CHAIN .............. 8-46
ADJUSTING THE PARKING BRAKE CABLE ............. 8-38
ADJUSTING THE POWER BRAKE CABLE ............... 8-38
ADJUSTING THE STRAW DISCHARGE
SELECTION CABLE ............................................... 8-39
AIR VOLUME ADJUSTMENT LEVER .......................... 7-4
ALIGN THE DIVIDER WITH THE CROW ROW ......... 7-15
AND THE STORAGE .................................................... 1-9
ASSEMBLING THE VERTICAL AUGER UNIT ............ 8-63
AUTOMATIC ENGINE SHUT OFF .............................. 4-15
AUTOMATIC FEEDING DEPTH CONTROL DEVICE . 4-19
AUXILIARY SHIFT LEVER ............................................ 4-8
B
BATTERY .................................................................... 8-25
BLOCKED THRESHING CYLINDER .......................... 10-3
BULLDOZING CROPS WITHOUT REAPING ............. 10-4
C
CAUTION DURING OPERATION ................................. 7-7
CHANGING AIR CLEANER ........................................ 8-47
CHANGING THE ENGINE OIL FILTER CARTRIDGE 8-53
CHANGING THE ENGINE OIL .................................... 8-48
CHANGING THE FUEL FILTER .................................. 8-51
CHANGING THE FUSES ............................................ 8-50
CHANGING THE HST AND HYDRAULIC
OIL FILTERS ........................................................... 8-54
CHANGING THE HYDRAULIC OIL IN
THE OIL TANK ........................................................ 8-50
CHANGING THE STRAW CUTTER BLADE ............... 8-54
CHANGING THE STRAW CUTTING BLADES ........... 8-61
CHANGING THE TRANSMISSION OIL ...................... 8-49
CHECK ENGINE OIL AND COOLANT .......................... 5-4
CHECKING BEFORE OPERATION .............................. 1-2
CHECKING DUST SCREEN, RADIATOR FIN
AND OIL COOLER FIN ............................................. 5-4
CHECKING FUEL ......................................................... 5-4
DSC62-영문판-12장.indd 2 2012-04-16 오후 5:15:55