Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 0 - March 05, 2019
Rev. 0
Page 3.1.2
Red or amber failure warnings are coupled with the lighting of
- a flashing red indicator/button
or
- a fixed amber indicator/button
Both indicators/buttons are located on the upper part of the L.H. instrument panel.
When either one lights up, press it once to reactivate. It will go out and is ready to
signal in the event of another failure. On the CAS display, the corresponding failure
message remains ON as long as the failed condition exists.
The actions associated to the
red warning or amber caution messages are
described in this Section of the POH.
The information associated to the
white
advisory messages are described in the
GARMIN Pilot's Guide.
To Next Page
Loading...
