EasyManua.ls Logo

Daher TBM 940 - Propeller Deicing

Default Icon
946 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pilot's Operating Handbook
Section 7
Description
Edition 0 - March 05, 2019
Rev. 2
Page 7.14.4
Propeller deicing
Propeller deicing is accomplished through electrical heating of blade roots. This
system
operates cyclically and alternately on the inboard and outboard zones of all
blades when PROP DE ICE system is activated either manually or automatically.
Each cycle is 180 seconds long. The cycles continue as long as the system is
activated.
The table hereafter gives the CAS messages and the status light colors
corresponding to the state of the system.
System state Status lights CAS
OFF
ON (AUTO mode)
ON (MAN mode)
FAIL
PROP DEICE FAIL
PROP DEICE ON is displayed in the CAS window if the engine is shut down with
PROP DE ICE switch still ON.
CAUTION
When engine is shutdown, do not set the PROP DE ICE switch to ON
for more than 10 seconds, damage to the propeller blades could result.
PIM - DO NOT USE FOR FLIGHT OPERATIONS

Table of Contents

Related product manuals