EasyManua.ls Logo

Daher TBM 940 - 6.4 Determining Weight and Balance

Default Icon
946 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pilot's Operating Handbook
Section 6
Weight and balance
Edition 0 - March 05, 2019
Rev. 0
Page 6.4.1
6.4 - Determining weight and balance
Genera
l
This section is intended to provide the pilot with the procedure to determine the weight
and balance of the airplane.
▲ WARNING ▲
It is the pilot's responsibility to ensure that the airplane is properly
loaded and that the weight and balance limits are adhered to.
▲
The procedure requires the following data related to the basic characteristics of the
empty airplane to be obtained from the last airplane weight and balance report :
- the empty weight, expressed in kg or lbs,
- the moment, expressed in m.kg or in.lbs,
- the CG, expressed in MAC %
If the airplane empty weight has varied since last weight and balance report (for
example, due to installation of optional equipment), refer to paragraph Determining
empty airplane characteristics to determine new empty weight and the corresponding
moment.
PIM - DO NOT USE FOR FLIGHT OPERATIONS

Table of Contents