Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 0 - March 05, 2019
Rev. 0
Page 3.12.34
XPDR1 ADS-B FAIL XPDR2 ADS-B FAIL
or
Indicates ADS-B OUT function of transponder 1 [or transponder 2] is inoperative.
Other functions may remain available.
► Fly the airplane ◄
If transponder 2 [or transponder 1] is available :
1 - RestoreADS-BOUTfunctionbysettingtransponder2[ortransponder 1]
as active.
2 - Continue flight.
3 - Inform maintenance department.
If transponder 2 [or transponder 1] is unavailable :
4 - Inform Air Traffic Control.
5 - Leave ADS-B OUT airspace.
6 - Continue flight.
7 - Inform maintenance department.
End of procedure.
To Next Page
Loading...
