Daher TBM 940 - Single Engine Indicator

Pilot's Operating Handbook
Section 7
Description
Edition 0 - March 05, 2019
Rev. 1
Page 7.6.10
Single engine indicator - see figures 7.6.5, 7.6.6 and 7.6.7
The single engine indicator simplifies the monitoring of engines parameters :
- TRQ, N
G and ITT gauges are merged into one display window.
- PROP RPM is always displayed with a digital indicator.
- TRQ, NG and ITT indications have a dedicated tab.
- At all times, only one indication has priority and is primarily displayed with an
analog gauge and associated digital information.
The two other indications that do not have priority aredisplayed only in the form
of a digital information.
Thereis onlyone arc displayed ata timewith eitherTRQ, NG or ITT. At all times
the digital value of TRQ, NG and ITT are displayed.
- Indication priority depends on engine condition (i.e. engine OFF/START or
engine running) and parameter level (i.e. normal, amber or red).
- When the engine is OFF and during engine start, the primarily displayed
indication is ITT.
- When the engine is running, the primarily displayed indication is TRQ.
NG and ITT indications take priority only if either parameter enters an
amber or red operating range.
Figure 7.6.5 - Priority indication = TRQ
PIM - DO NOT USE FOR FLIGHT OPERATIONS