Pilot's Operating Handbook
Section 7
Description
Edition 0 - March 05, 2019
Rev. 0
Page 7.6.13
Starter function
Starti
ng system consists of STARTER switch located on ENGINE START panel,
starter generator and ignition circuit (Refer to paragraph Ignition function).
Starting procedure is semi-automatic. Setting STARTER switch to ON connects the
starter generator which drives powerplant. STARTER lights on indicating that the
starter generator is operating.
Starter operation is stopped automatically by the electrical power system once a
sufficient starter-generator speed is reached or after 60 s. The pilot has the capability
to interrupt the start process anytime by setting momentarily the STARTER switch to
the ABORT position.
▲ WARNING ▲
Powerpl
ant starting must be performed by qualified personnel
and following procedures and parameters described in section 4
Normal procedures.
▲
To Next Page
