EasyManuals Logo

Dahua Technology ASA1222E-S User Manual

Dahua Technology ASA1222E-S
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
1
1 Product Overview
1.1 Introduction
Time attendance is an attendance device signing by fingerprint and password. The device
supports local time attendance setup, USB attendance statistical export with no software
(standalone mode) and time attendance management in platform software (platform
mode). It has simple and neat appearance, suitable for commercial building, shop, factory
and etc.
The device mainly supports:
TCP/IP Based
External electronic bell
Two user roles: administrator and normal user
All user allowed to query his attendance records (press#)
Attendance by fingerprint or password.
USB disk upgrade firmware
T9 text input
16 mechanical keys and 2.4 inch LCD.
Max of 2,000 fingerprints and 1,000 users.
Max of 100,000 attendance records.
24 groups of shift.
20 departments.
Warning:
Please use a DC 5V 1A adaptor, and work temperature cannot exceed 5℃~
+55.
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified in local area. Please use it
properly within rated specifications.
Usage must meet SELV requirement, and voltage provided shall meet Limited
Power Source by IEC60950-1, subject to label on device.
Connect product with type-I structure to grid power output plug with grounding
protection.
If you use plug or coupler as cut off device, please make sure the device could be
easily operated.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua Technology ASA1222E-S and is the answer not in the manual?

Dahua Technology ASA1222E-S Specifications

General IconGeneral
TypeBasic access control reader
CertificationCE, FCC
Product colorBlack
LED indicatorsStatus
Number of users1000 user(s)
Access code reader-
Fingerprint readerYes
Authentication typePassword
Keypad number of keys16
Fingerprint sensor typeOptical
Flash memory0.08 GB
Display typeTFT
Display diagonal2.4 \
Maximum resolution320 x 240 pixels
DC voltage range5 - 5 V
Power consumption1000 mA
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)5 - 95 %
Front cameraNo
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width175 mm
Height23 mm
Weight350 g

Related product manuals