Dahua Technology ASA1222E-S User Manual

3.3.3 Set Late Time and Early leave Time
Set allowed late time and early leave time range. Within these time ranges, record of
attendance is normal. The set late time and early leave time are valid for all shifts.
 Late time, which is sign in time later than general work start time, for example, work
start at 8 AM, if the late time is 5 minutes, then sign in after 8:05 AM is being late and
sign in before 8:05 AM is normal.
 Early leave time, which is sign out time earlier than general work end time, for
example, work end at 5 PM, if the early leave time is 5 minutes, then sign out before
4:55 PM is leaving early and sign out after 5 PM is normal.
Step 1. Enter Shift interface, select Late Time Setup, or Early Leave Time Setup, click
.
Step 2. Click number to enter time, as well as or to adjust time, and click
.
3.4 Attendance Statistics
Warning
Warning
Make sure you have inserted USB stick, and DO NOT eject USB stick during
exporting or operate the system, otherwise, exporting will fail and attendance
cannot work properly.
You can search and export attendance record, while the system stores up to 100,000
records.
After you enter main menu, click or to select Data, click . Or you can
directly click 【2】 key, see Figure 3-14.

Dahua Technology ASA1222E-S Specifications

General

Type	Basic access control reader
Certification	CE, FCC
Product color	Black
LED indicators	Status
Number of users	1000 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Password
Keypad number of keys	16
Fingerprint sensor type	Optical
Flash memory	0.08 GB
Display type	TFT
Display diagonal	2.4 \
Maximum resolution	320 x 240 pixels
DC voltage range	5 - 5 V
Power consumption	1000 mA
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Front camera	No

Weight and Dimensions

Depth	120 mm
Width	175 mm
Height	23 mm
Weight	350 g