User’s Manual
40
Enter the public client certification.
Enter the private client key.
Advanced options Figure 3-29
Table 3-23 Description of advanced options
Select TLS encryption standard. None by default.
Set whether to enable LZO compression during data
transmission.
Network Address Translation.
Set whether to enable NAT.
Set whether to bridge TAP to br0.
Enter IP address of the local OPENVN client.
Enter subnet mask of the local OPENVN client.
Set the MTU for the tunnel.
Set UDP fragment for the tunnel.
Set the maximum segment size of TCP data.
Set whether to support ns certification type.
Set authentication key of TLS.
Set additional configuration of the OPENVPN server.