User’s Manual
48
Configure Impede WAN DoS/Bruteforce. Step 6
Limit SSH Access: This function limits SSH access requests from the WAN. For
the same IP, up to 2 SSH connection requests are accepted per minute.
Limit Telnet Access: This function restricts Telnet access requests from the WAN.
For the same IP, up to 2 Telnet connection requests are accepted per minute.
Limit PPTP Server Access: When a PPTP server is created for the device, this
function limits PPTP access requests from the WAN. For the same IP, up to 2
PPTP connection requests are accepted per minute.
Limit L2TP Server Access: When a L2TP server is created for the device, this
function limits L2TP access requests from the WAN. For the same IP, up to 2 L2TP
connection requests are accepted per minute.
Click Save to save the configuration. Step 7
Click Apply Settings to apply the configuration. Step 8
(Optional) Click Cancel Changes to cancel the configuration. Step 9
3.7.2 Log Management
The Router can keep logs of all incoming or outgoing traffic for your Internet connection.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Security > Firewall. Step 2
In Log Management section, enable Log, and set parameters. Step 3
Log: To keep activity logs, select Enable. To stop logging, select Disable.
Log Level: The higher the log level, the more the logs.
Options: When select Enable, the corresponding connection will be recorded in
logs; otherwise logs will not be recorded.
Enable log Figure 3-39
(Optional) Click Incoming Log to view the latest temporary incoming logs of the Step 4
Router.
(Optional) Click Outgoing Log to view the latest temporary outgoing logs of the Router. Step 5
Click Save to save the configuration. Step 6
Click Apply Settings to apply the configuration. Step 7
(Optional) Click Cancel Changes to cancel the configuration. Step 8
To Next Page
Loading...