User’s Manual
25
In DHCPD section, click Add. Step 3
Configure DHCP. Step 4
Select a port or a bridge in the first dropdown list.
Set whether to enable DHCP in the second dropdown list.
Start: Specify the start address.
Max: Means the maximum assigned DHCP clients.
Leasetime: Indicates the lease time of the DHCP clients, expressed by minutes.
Add DHCP Figure 3-16
Click Save to save the configuration. Step 5
You can add another DHCP after saving the current one. You cannot configure multiple
DHCP servers at the same time.
Click Apply Settings to apply the configuration. Step 6
(Optional) Click Cancel Changes to cancel the configuration. Step 7
Wireless 3.4
3.4.1 Basic Settings
3.4.1.1 Physical Interface
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Wireless > Basic Settings.
Step 2
Enable Wireless Network, and configure wireless parameters. Step 3
To Next Page
Loading...