User’s Manual
49
Access Restrictions 3.8
You can block or allow specific types of Internet applications, and set Internet access policies
for specific PCs.
3.8.1 WAN Access
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Access Restrictions > WAN Access. Step 2
Configure access policy. Step 3
Access policy Figure 3-40
Policy: Select a policy, you can customize up to 10 access policies.
Click Delete to delete the selected policy.
Click Summary to view the policy details.
Status: Set whether to enable to the selected policy.
Policy Name: Enter the policy name.
PCs: Click Edit List of clients to add PC clients to the policy. You can add clients
by MAC addresses, IP addresses and IP ranges.
Deny: If you select Deny, the specific PCs will be denied to access any Internet
service during specific time periods.
Filter: If you select Filter, the specific PCs will be prevented from accessing the
specific websites during specific time periods. You can set up 10 Internet access
policies to filter Internet services accessed by the specific PCs during specific time
periods.
Configure when the policy takes effect. Step 4
1) In Days section, select the date on which the policy will be applied.
2) In Times section, set the time when the policy will be applied.
Set the blocking websites by URL addresses. Step 5
You can block access to websites by entering the URL addresses.
Set the blocking websites by keywords. Step 6
You can block access to websites by the keywords contained in the web pages.
Click Save to save the configuration. Step 7
Click Apply Settings to apply the configuration. Step 8
(Optional) Click Cancel Changes to cancel the configuration. Step 9
To Next Page
Loading...