User’s Manual
64
(Optional) Click Cancel Changes to cancel the configuration. Step 7
3.12.2 Keep Alive
You can schedule to turn on/off and reboot of the Router.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Keep Alive. Step 2
In Schedule Boot&Shutdown section, enable Schedule Boot&Shutdown. Step 3
Enable schedule boot and shutdown Figure 3-59
Set period, shutdown time, shutdown date, boot time and boot date. Step 4
In Schedule Reboot section, enable Schedule Reboot. Step 5
Enable schedule reboot Figure 3-60
Set interval or set to reboot at a specified time. Step 6
Interval (in seconds): Reboot after the interval.
At a set Time: Reboot at a specified time.
Before enabling schedule reboot, you must enable the Cron function.
Click Save to save the configuration.
Step 7
Click Apply Settings to apply the configuration. Step 8
(Optional) Click Cancel Changes to cancel the configuration. Step 9
3.12.3 Commands
You can run command lines directly through the web interface of the Router.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Commands. Step 2
To Next Page
Loading...