User’s Manual
63
3.12.1.7 Remote Management
You can monitor, manage and configure the Router remotely through the custom remote
management server.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Management. Step 2
In Remote Management section, enable remote management, and then set Step 3
parameters as needed.
Remote management Figure 3-57
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
3.12.1.8 Firmware Upgrade
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Management. Step 2
In Firmware Upgrade section, enable firmware upgrade.
Step 3
Enable firmware upgrade Figure 3-58
Set server IP address and port for firmware upgrade. Step 4
Click Save to save the configuration. Step 5
Click Apply Settings to apply the configuration. Step 6
To Next Page
Loading...