User’s Manual
62
Remote access Figure 3-55
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
3.12.1.5 Cron
The Cron subsystem schedules execution of Linux commands. You will need to use the
command line or startup scripts to use this function.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Management. Step 2
In Cron section, enable Cron and add additional Cron jobs. Step 3
Cron Figure 3-56
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
3.12.1.6 Language Selection
You can set the language of the web interface of the Router.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Management. Step 2
In Language Selection section, select a language. Step 3
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
To Next Page
Loading...