User’s Manual
68
Table 3-30 Description of router information
The name of the Router, you can modify it in Setup > Basic Setup.
For details, refer to "3.3.1 Basic Setup."
The firmware version of the Router.
The MAC address of WAN, you can modify it in Setup > MAC
Address Clone. For details, refer to "3.3.3 MAC Address Clone."
The serial number of the Router.
The host name of the Router, you can modify it in Setup > Basic
Setup. For details, refer to "3.3.1 Basic Setup."
The domain name of WAN, you can modify it in Setup > Basic Setup.
For details, refer to "3.3.1 Basic Setup."
The domain name of LAN, it cannot be modified.
The current time of the system.
The duration of system power on.
The status of the serial application.
The total available memory of RAM (that is physical memory minus
the reserved bits and the kernel's binary code size).
The free memory of the system. The Router will reboot if the memory
is less than 500 KB.
The used memory of the system (that is the total available memory
minus the free memory).
The used memory by the buffer (that is the total available memory
minus the used memory).
The memory used by high-speed cache memory.
The size of the active buffer or high-speed cache memory.
The size of the inactive buffer or high-speed cache memory.
IP Filter Max
Connections
The default value is 16384, and it cannot be modified.
The active IP connections in real time. Click the number to view
details of the active IP connections, including protocol, timeout,
source address, remote address, service name and state.
3.13.2 WAN
You can view the WAN connection type, and manage the traffic if the WAN connection is
enabled.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Status > WAN. Step 2
To Next Page
Loading...