User’s Manual
65
Run commands Figure 3-61
Run Commands: You can run command lines through the web interface. In
Commands text box, enter command and then click Run Commands.
Save Startup: You can set command lines that are executed when the Router
starts up. In Commands text box, enter command (only one command line) and
then click Save Startup.
Save Shutdown: You can set command lines that are executed when the Router
shuts down. In Commands text box, enter command (only one command line) and
then click Save Shutdown.
Save Firewall: You can set command lines that are executed when the firewall is
enabled. In Commands text box, enter command (only one command line) and
then click Save Firewall.
Save Custom Script: Custom script is stored in /tmp/custom.sh file. You can run it
manually or use cron to call it. In Commands text box, enter command (only one
command line) and then click Save Custom Script.
3.12.4 Factory Defaults
If the Router is not working and you do not know how to fix it, you can restore to factory
defaults.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Factory Defaults. Step 2
In Restore Factory Defaults, select Yes. Step 3
Factory defaults Figure 3-62
Click Apply Settings to apply the configuration. Step 4
To Next Page
Loading...