User’s Manual
21
Enter the address of the network or host to which you want to assign a
static routing.
The subnet mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Enter the IP address of the gateway device that is between the router and
the destination network or host.
Select LAN&WLAN, WAN, ANY, 3G and IPSEC according to the
destination IP address.
Click Show Routing Table, you can view the routing details of the current router.
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
3.3.5 VLANS
You can divide different VLAN ports as needed.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Setup > VLANs. Step 2
Set VLAN, Port and Assigned To Bridge. Step 3
15 VLAN ports (VLAN1–VLAN15) are supported. But there are only 5 time ports (1
WAN port and 4 LAN ports), which are divided according to your needs. Meanwhile
LAN port and WAN port cannot be divided into the same VLAN port.
To Next Page
Loading...