User’s Manual
17
Table 3-9 Parameter description of time settings
Whether to get the system time from NTP server or not.
Enter IP address of NTP server, up to 32 characters. If blank, the
system will find a server by default.
Click Save to save the configuration. Step 5
Click Apply Settings to apply the configuration. Step 6
(Optional) Click Cancel Changes to cancel the configuration. Step 7
Adjust Time
You can adjust the system time.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Setup > Basic Setup. Step 2
In Adjust Time section, adjust the system time by Auto or Manual, and then click Set. Step 3
If the NTP service is unavailable, you can adjust time manually.
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
3.3.2 Dynamic DNS
Dynamic DNS (DDNS) allows you to access your network by using domain names instead of IP
addresses. The DDNS service manages changing IP addresses and updates your domain
information dynamically.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Setup > DDNS. Step 2
Select a DDNS service. Step 3
The following options are available: Disable, DynDNS.org, freedns.afraid.org,
ZonEdit.com, No-IP.com, 3322.org, easyDNS.com, TZO.com, DynSIP.org and Custom.
The actual interfaces are different when you select different DDNS services. Take
3322.org as an example.
To Next Page
Loading...