Dahua DH-WM4700-O - Page 22

User’s Manual
16
Parameter
Description
Client Lease Time
Specifies the lease period of the dynamic IP address occupied by a
network user. After the dynamic IP address expires, a new dynamic
IP address will be automatically assigned to the user.
The value range is 0–99999, and the default value is 1440 minutes
(1 day).
Static DNS 1/DNS 2/DNS
3
The Domain Name System (DNS) is how the Internet translates
domain or website names into Internet addresses or URLs. Your ISP
will provide you with at least one DNS server IP address. If you want
to use another DNS server, enter the IP address of the DNS server
in one of these fields. So that the Router can quickly access to the
operating DNS servers. You can enter up to 3 DNS server IP
addresses.
WINS
The Windows Internet Naming Service (WINS) manages every PC
that interacts with the Internet. If you want to use a WINS server,
enter the IP address of the WINS server. Otherwise, leave it blank.
Use DNSMasq for DHCP
Set as needed.
Use DNSMasq for DNS
Add the domain name to the local search domain to increase the
extension of host option.
If it is enabled, IP address and DNS will be assigned for the

subnet.
If it is disabled, dhcpd service is used to assign IP address and

DNS for the subnet.
DHCP-Authoritative
Set as needed.
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
Time Settings
You can set the time zone as needed.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Setup > Basic Setup. Step 2
In Time Settings section, enable NTP Client. Step 3
Enable NTP client Figure 3-8
Set parameters. Step 4