User’s Manual
60
(Optional) Click Cancel Changes to cancel the configuration. Step 6
Administration 3.12
The network administrator can manage specific router functions to ensure access and security.
3.12.1 Router Management
3.12.1.1 Router Password
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Management. Step 2
In Router Password section, set username and password. Step 3
The user name is admin by default.
The new password must not exceed 32 characters and must not contain any
blank spaces.
We strongly recommend that you change the default password and update it
regularly for security.
Router password Figure 3-52
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
3.12.1.2 Adding User
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Administration > Management. Step 2
In Client Password section, set name and password for the new user. Step 3
To Next Page
Loading...