Dahua DH-WM4700-O - Virtual IP Mapping; Qos Setting; Basic

User’s Manual
55
DMZ Figure 3-46
Enter the IP Address of DMZ Host. Step 4
Click Save to save the configuration. Step 5
Click Apply Settings to apply the configuration. Step 6
(Optional) Click Cancel Changes to cancel the configuration. Step 7
3.9.4 Virtual IP Mapping
Log in to the web interface of the Router. Step 1
In the left navigation menu, select NAT > Virtual IP Mapping. Step 2
Click Add. Step 3
Add virtual IP mapping Figure 3-47
Set virtual IP, real IP, objective IP and device. Step 4
Select Enable check box to enable the virtual IP mapping. Cancel selection to disable Step 5
the virtual IP mapping.
Click Save to save the configuration. Step 6
Click Apply Settings to apply the configuration. Step 7
(Optional) Click Cancel Changes to cancel the configuration. Step 8
(Optional) Select the target application in Delete column, and then click Save to delete Step 9
the selected application.
QoS Setting 3.10
3.10.1 Basic
QoS allows you to limit the traffic of upload and download separately, and assign priorities to
specific IPs or MACs.
Log in to the web interface of the Router. Step 1
In the left navigation menu, select QoS Setting > Basic. Step 2