Repeat plate
detection time
One plate can only trigger one ANPR event within the period.
Click OK to finish configuration.
5.4.1.3.2 Advance Config
In this section, you can configure the advanced functions of plate recognition and customize
special functions.
Select Setting > ITC > Intelligent > Video Analysis > Advance Config.
The Advance Config interface is displayed. See Figure 5-28.
Advance Config
Configure parameters according to actual requirement. Please refer to Table 5-16 for
more details.
Table 5-16 Advance config parameters description
Plate confidence filtering
Confidence level, used to set the range of limiting plate
recognition condition, adjustment range is from 0 to 100.
The lower the confidence level is, the less limited conditions
there will be, and correspondingly the plate is easier to be
recognized and false capture rate becomes higher as well.
The higher the confidence level is, the more limited
conditions there will be, and correspondingly the plate is
harder to be recognized and false capture rate becomes
lower as well.
Algorithm Customized
Expression
Inputs customized algorithm expression and realize customized
special function.
Click OK to finish configuration.
5.4.1.4 OSD Config
5.4.1.4.1 Video OSD
In this section, you can set OSD info of video channel.
To Next Page
Loading...
