Dahua ITC215-PW4I-IRLZF27135

WEB Client 72
5.4.5.3 FTP
It can set picture name and storage path, click Help to view naming rule.
FTP function can be enabled only when it was selected as destination path. When the network
doesn’t work, you can save all the files to the internal SD card for emergency.
Select Setting > Storage > Destination > FTP.
The FTP interface is displayed, see Figure 5-64.
FTP
Configure parameters according to actual requirement. Please refer to Table 5-31 for
more details.
Table 5-31 FTP parameter description
Parameter
Note
Protocol Type
Select FTP storage protocol, which includes SFTP and FTP.
Offline Transfer
Select it and enable offline transfer.
When network is disconnected or failed, you can store the picture into local
storage card and it will automatically upload to FTP server or platform after
network resumes.
Enable
Enable the storage path of FTP server.
Server IP
IP address of FTP server.
Encode Mode
Encode mode of Chinese character when naming picture, which includes
UTF8 and GB2312. Click Test and it create two files adopting UTF-8 and
GB2312 on the FTP server, which can be used to confirm server’s encoding
mode.
Port
The port number of FTP server.
Username
Username and password of FTP server.