WEB Client 80
Add user
Configure user parameters. For the detailed description, see Table 5-36.
Table 5-36 User parameter description
User’s unique identification. You cannot use existing user name.
User’s password and confirm password.
The password can be set from 8 characters to 32 nonblank
characters and contains at least two types from capital letter,
small letter, number and special characters (excluding “'”, “"”,
“;”, “:” and “&”)
Follow the password security notice to set a high security
level password.
The new password should be in accordance with the confirm
password.
The group that users belong to. Each group has different
authorities.
Click Save to finish configuration.
The newly added user is displayed in the user list.
After adding user, click to modify user password, group, memo and
authorities; click to delete the added user, admin user cannot be deleted.
Click in the admin row to modify user name and email address.
5.4.6.3 Safety
5.4.6.3.1 IP Filter
In order to strengthen network security and protect device data, you can set the user who has
access to the device via IP filter.
Set trusted list mode: It only allows the user whose IP address exists in trusted list to log in
device.
To Next Page
Loading...
