WEB Client 82
Select Trusted List and select some line in the list.
Click OK on the bottom of Trusted List tab. The system will prompt Successfully
saved.
You can also implement following operations in the Trusted List tab.
Click and modify the added IP address or IP segment.
Click and delete the added IP address or IP segment.
Click and remove all the IP address or IP segment.
The setting method of banned list is similar to trusted list. Please make settings by referring to
the setting method of trusted list.
5.4.6.3.2 System Service
Select the system service which needs to be enabled according to actual requirement.
Select Setting > System > Safety > System Service.
The System Service interface is displayed. See Figure 5-78.
System Service
Select needed system service. Please refer to Table 5-38 for more details.
Table 5-38 System service parameters description
SSH (Secure Shell) implements data encrypted transmission and
effectively avoid information leakage during remote management.
Multicast: It realizes point-to-multipoint network connection between
sender and receiver.
Broadcast: Broadcast data packet in IP subnet, all the hosts in the
subnet will receive these data packets.
When you forget the password of admin user, you can set new
password via password reset function.
To Next Page
Loading...
