Figure 5-40 Tour
Step 3 In the Tour No. box, enter the value for the tour route.
Step 4 In the Preset box, enter the preset value.
Step 5 Click Add Preset.
A preset will be added for this tour.
●
You can repeat adding more presets.
●
Click Delete Preset to delete the preset for this tour. This operation can be repeated
to delete more presets. Some protocols do not support deleting.
5.6.7.3.3 Conguring Patterns
Procedure
Step 1 On the expanded PTZ control panel, click .
Step 2 Click the Pattern tab.
User's Manual
153
To Next Page
Loading...
