Page.115.
Select and press “WIFI” several seconds, to set static IP address.
Wi-Fi hotspot: input “SSID” name and “password”, and then click “ok”to create Wi-Fi hotspot.
Brightness: Set the desired brightness of the tester and adjust the sleep time settings.
Volume: Set volume level.
SD Card: Displays SD Card Capacity. You can also format the SD card or unmount it before removing
it.
FTP server: Once the tester connects to a network, a computer can be used to read the SD card files via
FTP.
To Next Page
Loading...
Need help?
General