Page.86.
Built-in BNC cable, network cable, RVV control cable, Telephone line and TVVB cable etc can test, 11
groups user-defined cable can be set.
Click “Cable” “Type” to select cable and start testing. One tap on “Start” do one testing. If select built
in cable type for testing, click “+” and“-” to adjust cable’s wave speed .
User-defined calibration: Choose the cable 100 meters to 200 meters (more than 50 meters) , click
“Cable” , “Type” to select user-defined 1 for calibration, 11 groups user-defined can be set.
To Next Page
Loading...