Daikin Altherma EBLQ011CA3V3 - Page 134

3/8
Breadcrumb Field code Setting name Range, step
Default valu
e
Date Value
Field settings table
Installer setting at variance with
default value
A.2.1.8 [7-02] R/W
0: 1 LWT zone
1: 2 LWT zones
A.2.1.9 [F-0D] R/W 0: Continuous
1: Sample
2: Re
q
ues
t
A.2.1.A [E-04] R/O
0~1
0: No
A.2.1.B R/W 0: At unit
1: In room
A.2.1.C [E-0D] R/W
0: No
1: Yes
└─ Options
A.2.2.A [D-02] R/W
0: No
1: Secondary rtrn
2: Disinf. Shunt
3: Circul. Pump
4: CP & disinf. Sh
A.2.2.B [C-08] R/W
0: No
1: Outdoor sensor
2: Room sensor
└────────────────── Control box
A.2.2.E.1 [E-03] R/W
R/O (*3)(*4)
0: No BUH (*1) (*2)
1: 1 step (*3) (*4)
2: 2 ste
p
s
A.2.2.E.2 [5-0D] R/W
R/O (*3)(*4)
0~5
1: 1P,(1/1+2)
4: 3PN,(1/2)
5: 3PN,
(
1/1+2
)
A.2.2.E.3 [D-01] R/W
0: No
1: Open tariff
2: Closed tariff
A.2.2.E.4 [E-05] R/W
0: No
1: Yes
A.2.2.E.5 [C-05] R/W
1: Thermo ON/OFF
2: C/H re
q
uest
A.2.2.E.6 [C-06] R/W 0~2
1: Thermo ON/OFF
└────────────────── Option box
A.2.2.F.1 [C-02] R/W
0~3
0
A.2.2.F.2 [C-09] R/W
0: Normally open
1: Normall
y
closed
A.2.2.F.3 [D-08] R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000
p
ulse/kWh
A.2.2.F.4 [D-09] R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000
p
ulse/kWh
A.2.2.F.5 [C-08] R/W
0: No
1: Outdoor sensor
2: Room sensor
A.2.2.F.6 [D-04] R/O
0: No
1: Yes
└─ Capacities
A.2.3.1 [6-02] R/W 0~10kW, step: 0,2kW
3kW
A.2.3.2 [6-03] R/W 0~10kW, step: 0,2kW
3kW
A.2.3.3 [6-04] R/W 0~10kW, step: 0,2kW
0kW
└─ Space operation
└─ LWT settings
└────────────────── Main
A.3.1.1.1 R/W 0: Fixed
1: Weather dep.
2: Fixed + scheduled
3: WD + scheduled
A.3.1.1.2.1 [9-01] Temperature range Minimum temp (heating) R/W 15~37°C, step: 1°C
25°C
A.3.1.1.2.2 [9-00] Temperature range Maximum temp (heating) R/W 37~55°C, step: 1°C
55°C
A.3.1.1.2.3 [9-03] Temperature range Minimum temp (cooling) R/W 5~18°C, step: 1°C
5°C
A.3.1.1.2.4 [9-02] Temperature range Maximum temp (cooling) R/W 18~22°C, step: 1°C
22°C
A.3.1.1.5 [8-05] R/W 0: No
1: Yes
A.3.1.1.7 [9-0B] R/W
0: Quick
1: Slow
└────────────────── Additional
A.3.1.2.1 R/W 0: Fixed
1: Weather dep.
2: Fixed + scheduled
3: WD + scheduled
A.3.1.2.2.1 [9-05] Temperature range Minimum temp (heating) R/W 15~37°C, step: 1°C
25°C
A.3.1.2.2.2 [9-06] Temperature range Maximum temp (heating) R/W 37~55°C, step: 1°C
55°C
A.3.1.2.2.3 [9-07] Temperature range Minimum temp (cooling) R/W 5~18°C, step: 1°C
5°C
A.3.1.2.2.4 [9-08] Temperature range Maximum temp (cooling) R/W 18~22°C, step: 1°C
22°C
└────────────────── Delta T source
A.3.1.3.1 [9-09] R/W 3~10°C, step: 1°C
5°C
Emitter type
Heating
LWT setpoint mode
External sensor
PCC by digital inputs
BUH: step 1
BUH: step 2 (*1)(*2)
LWT setpoint mode
Modulated LWT
Booster heater
Preferential kWh rate
Contact type main
Ext. backup heat src
Alarm output
External kWh meter 1
External kWh meter 2
DHW operation
Contact type add.
Pump operation mode
Power saving possible
User interface location
External sensor
Backup heater steps
BUH type
DHW pump
Glycol present
Number of LWT zones
(*1) *B*CAV3/CAW1_
(*2) *D*CAV3/CAW1_
(*3) *B*CA3*_(*4) *D*CA3*
4P522033-1A - 2018.06