1. Purpose
The wired user interface BRC073A1 allows the end user to control connected Daikin indoor units. The wired user interface
uses typically the S21 connection of the indoor unit to communicate.
2. Overview of compatible Daikin units ranges
Attention: Some indoor models do not have the S21 connector as standard. In this case, it is needed to install an
optional PCB adapter (eg KRP980B1) with integrated S21 connector. For details see chapter 7. Overview of compatible
Daikin models .
The wired userinterface can be connected to following model ranges:
description Brand model range
Wall mounted Ururu Sarara Daikin FTXZ-N
Emura Daikin FTXG-LW/S
Emura Daikin FTXJ-LW/S
Wall mounted Daikin CTXS-K
Wall mounted Daikin FTXS-K
Wall mounted Daikin FTXM-K
Wall mounted Daikin FTXLS-K
Wall mounted Daikin FTXS-G
Wall mounted Daikin FTX-J
Wall mounted Daikin FTX-GV
Wall mounted Daikin FTXL-JV
Wall mounted Daikin FTX-KV
Siesta Daikin ATXS-K
Siesta Daikin ATXS-KV
Siesta Daikin ATXL-JV
Siesta Daikin ATX-J
Floor standing Nexura Daikin FVXG-K
Floor standing Daikin FVXS-F
Flexi type Flexi type Daikin FLXS-B(9)
13
To Next Page
Loading...
