Daikin brp069a42 - Other Intergration Devices

Daikin’s adapter PCBs provide simple solutions
for unique requirements. They are a low cost option
to satisfy simple control requirements and can be
used on single or multiple units.
(E)KRPB*
adapter for wiring
• Facilitates integration of auxiliary heating apparatus, humidifiers, fans, damper
• Powered by and installed at the indoor unit
KRPA*/KRPA*
Wiring adapter for
electrical appendices
• Remotely start and stop up to  indoor units ( group) (KRPA* via P P)
• Remotely start and stop up to  indoor units ( groups) (KRPA* via F F)
• Alarm indication/ fire shut down
• Remote temperature setpoint adjustment
DTAA*
Outdoor Unit External
Control Adapter
• Individual or simultaneous control of VRV system operating mode
• Demand control of individual or multiple systems
• Low noise option for individual or multiple systems
KRP*
Interface adapter for
DIII-net
• Allows integration of split units to Daikin central controls
KRP*
Wiring adapter normal
open contact / normal
open pulse contact
• Switch off auto restart after power failure
• Indication of operation mode / error
• Remotely start /stop
• Remotely change operation mode
• Remotely change fan speed
KRP*
Adapter for split units
without an S port
• Connect a wired remote control
• Connect to Daikin central controls
• Allow external contact
Concept and benefits
› Low cost option to satisfy simple control requirements
› Deployed on single or multiple units
ADAPTER PCBs
Simple solutions for unique requirements
152
• Control systems
• Sensors & other devices • KRCS01-1B / KRCS01-4B • Wired room temperature sensor