Daikin brp069a42 - 5 Standard Protocol Interfaces; Modbus Interface

132
• Control systems
•Standardprotocolinterfaces•RTD-modbusinterface
RTD-RA
› Modbus interface for monitoring and control
of residential indoor units
RTD-RA/SMART
› Modbus interface for monotoring and control of
residential indoor units
› Limits the consumption or switches off the
air conditioning whenever the total house
consumption is too high
› Can be used with Split and multi split systems
RTD-NET
› Modbus interface for monitoring and control
of Sky Air, VRV, VAM and VKM
RTD-10
› Advanced integration into BMS of Sky Air, VRV,
VAM and VKM through either:
- Modbus
- Voltage (-V)
- Resistance
› Duty/standby function for server rooms
RTD-LT/CA
› Modbus interface for monitoring and
control of Daikin Altherma low temperature
(EHVH(X)-C / EHBH(X)-C)
› Voltage and resistance control
› Photovoltaic operation signal for energy saving
RTD-20
› Advanced control of Sky Air, VRV, VAM/VKM
and air curtains
› Clone or independent zone control
› Increased comfort with integration of CO

sensor
for fresh air volume control
› Save on runningcosts via
- pre/post and trade mode
- set point limitation
- overall shut down
- PIR sensor for adaptive deadband
RTD-HO
› Modbus interface for monitoring and control of
Sky Air, VRV, VAM and VKM
› Intelligent hotel room controller
RTD-W
› Modbus interface for monitoring and control of
Daikin Altherma Flex Type, VRV HT hydrobox and
small inverter chiller
RTD
Modbus Interface
Integration of RA, Sky Air,
VRV, Daikin Altherma Flex,
small inverter chiller and small
inverter chiller in BMS or home
automation systems