Daikin RoCon HP - 9 Notes; User-Specific Settings; Switching Timer Program

9 x Notes
Daikin RoCon HP
Daikin Controller
008.1420844_13 – 02/2016
Operating instructions
59
9Notes
9.1 User-specific settings
9.1.1 Switching timer program
The factory settings of the timer programs are stated in
chapter 3.4.7, tab. 3-9.
● Enter your switching time settings in the table below.
Switching cycle 1 Switching cycle 2 Switching cycle 3
Temperature
setting
[T-Room 1 Setpoint]: ____ °C [T-Room 2 Setpoint]: ____ °C [T-Room 3 Setpoint]: ____ °C
Time period On Off On Off On Off
HC Program 1
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
HC Program 2
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Tab. 9-1 Individual settings in the heating timer programmes
Switching cycle 1 Switching cycle 2 Switching cycle 3
Temperature
setting
[T-DHW Setpoint 1]: ____ °C [T-DHW Setpoint 2]: ____ °C [T-DHW Setpoint 3]: ____ °C
Time period On Off On Off On Off
DHW Program 1
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
DHW Program 2
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Tab. 9-2 Individual settings in the hot water timer programmes