SiUS281811EA Field Setting from Remote Controller
Part 5 Field Settings and Test Operation 167
1.5.36 Setback Availability
For BRC1E series only
Select the operation mode in which the setback function is available.
: Factory setting
1.5.37 Setting Restricted/Permitted for Airflow Block
For Sensing flow type only
The airflow block function cannot be enabled when closure material kit, fresh air intake kit,
separately installed natural evaporation type humidifier, or branch air duct is equipped, due to
the possibility of dew condensation.
This setting restricts the airflow block function, preventing that the airflow block is inadvertently set
to ON.
Ensure that “Airflow block restricted” is set when using the options listed above.
: Factory setting
Mode
No.
First Code
No.
Second Code
No.
Contents
1e 2
01
N/A
02 Heat only
03 Cool only
04 Cool/heat
Mode
No.
First
Code No.
Second
Code No.
Contents
1e 14
01
Airflow block permitted
02 —
03 —
04 —
05 Airflow block restricted
To Next Page
Loading...
