Test Operation SiE-05C
88 Test Operation Inverter K Series
Operation Contents
and Function
If you set a Master remote controller
(Remote controller not displaying
<CHANGEOVER UNDER CONTROL>)
The other remote controllers (Remote
controllers displaying
<CHANGEOVER UNDER CONTROL>)
1.
to COOL/HEAT
l switch to the operation mode set
by the master remote controller.
l However, they can switch to FAN
operation and from COOL to
If you set a Master remote controller
(Remote controller not displaying
<CHANGEOVER UNDER CONTROL>)
The other remote controllers (Remote
controllers displaying
<CHANGEOVER UNDER CONTROL>)
2.
to FAN,
l cannot set any mode other than
FAN.
(VL049)
SI-05C.BOOK Page 88 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html