SiE-05C Test Operation
Test Operation PLUS Series 287
1.7 External Control Adaptor for Outdoor Units (DTA104A61 · DTA104A62)
Objective/Use By adding an adaptor for outside control of outdoor units to BS units or indoor units connected in a DIII-
NET, you can simultaneously select cool/heat mode for several outdoor units in the system, and it enables
demand control and low noise control.
Part Names and Functions
Note: SS2 is not applicable to cooling only system.
1.7.1 (1) Cool/Heat Mode Unified Selection (For Detailed Example of Wiring, See The Page
Describing Cool/Heat Mode Control.)
Refer to Cool/Heat Mode Switching on P290
System Outline
SI-05C.BOOK Page 287 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
